= = = AVTECH - Bulgaria = = =

За хората, които държат на качеството

 

BEST - technical sprays

 

 
 

Best-Chain spray with MoS2

BEST-chain spray with MoS2 is suitable for permanent inside and outside lubrication of bearings, gear- and worm drives, roller- and ball bearings, o-rings, wire cables and all types of  joints, couplings and chains.

Properties

  • highly effective – excellent creep properties
  • very good adhesive properties
  • excellent corrosion protection
  • water repellent
  • temperature range:  – 40°C up to + 150°C

Directions for use
Clean parts to be treated of oily and greasy residue. Shake product well before use. Spray on  from a distance of approx. 20 cm, allow to dry for approx. 5 – 10 minutes.

TECHNICAL INFORMATION

MSDS

 

Best-Clean 1000

BEST-Clean 1000 is a cleaning agent based on solvents and free of CFC/FC-components. It dries off without any residue and features a strong and fast cleaning effect.

BEST-Clean 1000 is the ideal cleaning agent in the fields of industry, crafts, repair and maintenance.

APPLICATION
BEST-Clean 1000 cleans metals, glass, ceramics, rubber, synthetic materials, etc. We recommend performance tests on thermoplastic materials, e.g. PVC, PS, PC or PMMA prior to use. BEST-Clean 1000 is also recommend for pretreatment and degreasing of bonding surfaces, removal of oil, grease, resin, adhesive residue, clutch and brake abrasions, for the cleaning of engine parts, springs, electrical installations, starters, bearings and guiding devices and for the removal of difficult-to-treat stains on upholstery and textiles.

INSTRUCTIONS FOR USE:
Shake well before use. Spray on surface to be treated from a distance of 20 – 30 cm. In case of strong contamination repeat procedure. Wipe off excess solvent with a clean, absorbent and lint-free cloth to intensify the cleaning effect. Allow product to dry off before continuing or applying bonding agent.

Available in units of 500 ml.

STORAGE
Store in a cool, well ventilated place. Keep container tightly closed. Shelf life in unopened original container: 12 months

TECHNICAL INFORMATION

MSDS aerosol

 

Best-Clean 2000

BEST-Clean 2000 is a virtually odourless cleaning agent based on solvents and free of CFC/FC-components, ketones and aromates. It dries off without any residue. Contrary to cleaning agents containing CFC/FC components it does not influence or compromise the strength of bonding agents used in the subsequent application. BEST-Clean 2000 is an adequate alternative to fluorinated or chlorinated hydrocarbons.

APPLICATION
BEST-Clean 2000 cleans metals, glass, ceramics, rubber, synthetic materials, etc. We recommend performance tests on thermoplastic materials, e.g. PVC, PS, PC or PMMA prior to use. BEST-Clean 2000 is also recommend for pretreatment and degreasing of bonding surfaces.

INSTRUCTIONS FOR USE:
Spray on surface to be treated from a distance of 20 – 30 cm. In case of strong contamination repeat procedure. Wipe off excess solvent with a clean, absorbent and lint-free cloth to intensify the cleaning effect. Allow product to dry off before continuing or applying bonding agent (2 – 3 minutes).

Available in units of 400 ml (aerosol) or 1000 ml / 5000 ml.

STORAGE
Store in a cool, well ventilated place. Keep container tightly closed. Shelf life in unopened original container: 12 months

TECHNICAL INFORMATION

MSDS aerosol

 

Best-Leak detector spray

BEST-Leak detector spray is a product for maintenance and inspection of gas- and compressed air systems. It works with pure nitrogen and therefore is non-flammable. The bubble-forming, aqueous tenside solution detects leakages in pipelines with gaseous media, e.g. compressed air, natural gas, technical gases.

INSTRUCTIONS FOR USE

For controlled leak detection and for surveillance spray product on the potential leakage areas on lines and connections from a distance of approx. 30 cm. Bubble formation makes leakages visible.

TECHNICAL INFORMATION

MSDS

Best-Rust Remover with MoS2

 

BEST-Rust Remover with MoS2 is a lubricant and contact agent. Fields of application are maintenance, repair, service and production.

Properties

  • based on mineral oil, isoparaffinic hydrocarbon mixture and corrosion protection inhibitors
  • lubricant and contact agent
  • fast action on highly corroded joints

FIelds of application

BEST-Rust Remover features high capillary action and excellent creep properties and is therefore predestined for the following fields of application:.

  • loosens corroded joints and screw connections, e. g. screws, bolts and nuts
  • protects against corrosion, lubricates sliding surfaces, eliminates squeaking and creaking
  • removes water from ignition contacts and electric wires
  • ensures contact on distributor caps
  • cleans and maintains break linkages, bowden cables, chains of all types and ensures their readiness for operation

Directions for use
Shake container thoroughly before use  (approx. 2 Min) and wet parts to be treated. Treated parts can be loosened a few minutes after application.

TECHNICAL INFORMATION

MSDS

                       Ако желаете повече информация за продуктите и начина им на приложение моля пишете ни office@avtech-bg.eu  или GSM: 087 814 8457           

BEST-Klebstoffe® Cyanoacrylate Adhesives
Информация за тази група
BEST-Klebstoffe® Anaerobe Adhesives
BEST-Klebstoffe®     UV Adhesives  
Информация за тази група
BEST-Klebstoffe® Two component Adhesives  
BEST-Klebstoffe® Cleaners
BEST-Klebstoffe®  Technical sprays
BEST-Klebstoffe® Contact Products
BEST-Klebstoffe® Equipment 
Технически данни
Техника на безопасност

Новини

За контакти с нас

Посетете e-Shop

Tyxo.bg counter

© Copyright 2013. All rights reserved. Contact: AVTECH